Notes On Installation; Caution - HP u818x User Manual

Notes on Installation

1. Please measure the front windshield viewing area, make sure not to block
driver's front view, install the camcorder below the rearview mirror (the
central, higher right position of the front windshield). And we recommend
that the sky and the land occupied by the screen 50%, fix the car holder and
then adjust the camcorder so that the lane is aligned with the screen. Proper
installation enables the camcorder to maximize the efficiency also can
enhance the accuracy of LDWS.
2. Make sure that the lens is within the wiping range of the windscreen wiper to
ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on the lens
and will result in unclear videos or pictures. Clean the lens on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may damage the
tint film.
5. Make sure that the installation position is not hindered by the tinted window.
6. This product is suitable for light windshield or light color heat-resistant film
windows , it will affect video quality if install it on the dark windows or dark
heat-resistant film windows.
7. Use the products of the attached power charger only, please do not use other
brand power charger, in order to avoid equipment burn.
8. We have provided 2 mounting brackets with this HP Car Camcorder. The
suction cup bracket is designed for temporary mounting and will require
periodic re-installation. The adhesive bracket is designed for one time and
long term installation. We recommend using the adhesive bracket if
permanent installation is desired. Please install the bracket on the best
open-field view. Do NOT install the bracket in a location that may obstruct
your field of view and impact driving safety. HP or our authorized HP partners
are NOT liable for any damages or data loss due to improper bracket
mounting or suction cup bracket losing seal and dropping.

Caution

Due to local laws and vehicles safety considerations, do not operate the

camcorder while driving.
Set up time zone, time and date accurately before you use this camcorder.

Please use SuperCar software under the condition that Electronic Map are

functioning normally.
The firmware function in the camcorder is for reference only, drivers are

advised to exercise discretion based on actual road conditions.
4