Ford Focus Electric 2017 Quick Reference Manual page 8

1 CRUISE CONTROL
To Set Your Cruise Control Speed
A. Press and release ON.
B. Drive to the desired speed.
C. Press and release SET+, then take
your foot off the accelerator.
After you set your speed, you can adjust your
cruise speed by pressing and releasing SET +/–.
To disable, press and release OFF.
LEFT VEHICLE INFORMATION DISPLAY
2
Provides you with specific information about
various systems on your vehicle including the
status of your high-voltage battery and the
other unique features of your electric vehicle.
Use the left-hand, 5-way controls on the
steering wheel to choose and confirm settings
and messages. Refer to the Instrument Cluster
and Information Displays chapters of your
Owner's Manual for more information.
ELECTRIC MOTOR WARNING LAMP
3
Lights when your electric motor is running
and detects a malfunction. If the warning lamp
stays on or continues to come on, contact an
authorized dealer as soon as possible.
4 TILT/TELESCOPE STEERING COLUMN
Unlock the steering wheel by pulling the lever down.
Adjust the steering wheel to the desired position.
Push the lever up to lock the steering wheel in place.
5 RIGHT VEHICLE INFORMATION DISPLAY
Displays information about Entertainment, Phone,
Navigation* and Surplus.
2227257_17a_Focus_Electric_QRG_100616.indd 7
Use the right hand 5-way controls on your
steering wheel to scroll through, highlight and
make minor adjustments within a selected
menu. Refer to the SYNC 3 chapter in your
Owner's Manual for more information.
6 MEDIA STEERING WHEEL CONTROLS
Press + to increase or – to decrease volume levels.
Press the right or left arrows to hear the next or
previous saved radio station, CD track or MP3 choice.
Pull to access voice recognition.
Press to answer an incoming phone call.
Press to end a phone call and exit phone mode.
7 PUSH BUTTON SWITCH AND READY TO DRIVE
Note:
Your intelligent access transmitter must be
inside the vehicle to put the vehicle in "Ready to Drive"
mode. The keyless warning alert sounds when you
open the driver's door and your vehicle is in RUN.
Allows you to go into "Ready to Drive" mode by
pressing the START STOP control while fully pressing
down on the brake pedal. A green "Ready to Drive"
indicator light appears in the instrument cluster
after you start the vehicle. This lets you know that
the vehicle is on and ready to drive. Press the START
STOP control again to switch the vehicle off.
HAZARD CONTROL
8
9 STOP DC FAST CHARGING
Press the charge unlock button on the center
console. Charging can also be stopped when
your vehicle reaches a full charge, using the
charging station, or by using the touch screen.
*
if equipped
7
10/6/16 10:57 AM