Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lockly PL45E1UQ
Summary of Contents for Lockly PL45E1UQ
- Page 1 REV：1.1 ERP机型： ERP P/N： PL45E1UQ-US-SMT00010A-V1 描述: 说明书:PL45E1UQ/PGV528,SMT000,REV.A(UMPGV528W20220808),196×196MM, 封面&底面:128g双粉纸双面过哑油,单黑印刷,内页80g书纸,双面印单黑,22页44面装订本, RoHS2.0,REACH,Prop65,POPs,PAHs Designed：Walter Date：2022-08-08 SMART SAFE USER MANUAL...
-
Page 3: Table Of Contents
Table of Contents Section 1 - Product Highlights Unlocking Lockly with App Setting Up the Secure Link Wi-Fi Hub Product Features Connecting Your Lockly Smart Safe Unlocking with Physical Key Section 2 - Product Overview Safe Mode Product Overview - Exterior... -
Page 4: Product Features
The offline access code can allow owners to issue access codes, set the allowed access duration, all without Lockly ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. -
Page 5: Product Overview - Exterior
2.1 Product Overview - Exterior Reboot Button Bluetooth light Fingerprint OK Button Keypad Buttons Touchscreen Key Hole SECTION 2.1... -
Page 6: Product Overview - Interior
2.2 Product Overview - Interior When the Safe opens, the light automatically turns ON and OFF after 2 minutes. Touch the keypad to turn ON the lights again. Program Button Flashlight Battery Compartment Type-C Port SECTION 2.2... -
Page 7: Understanding Your Smart Safe
OAC (Offline Access Code ™ For any questions you can always visit https://Lockly.com/help for assistance. Don’t forget that Lockly works best with our iOS and Android app. Please download the app by visiting ™... -
Page 8: Rebooting Your Smart Safe
Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the Safe. Your Lockly will beep once after reboot. Only reboot when necessary. You will need something small such as a paperclip, to press the reboot button located on the exterior of the safe, left of the fingerprint reader. -
Page 9: Low Battery
2.5 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your Smart Safe from shutting down. -
Page 10: Changing The Battery
2.6 Changing The Battery Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. -
Page 11: Configuring Access
The Default Access Code is Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 100 sets of Access Codes can be stored for use at any given time. -
Page 12: Entering Programming Mode
Check Access Code After entering Programming Mode, you should see the screen as displayed to the right on Bluetooth Pairing Profile your Lockly keypad. Follow the following steps to add, delete, or check your Access Codes. Restore Factory Settings SECTION 3.2... -
Page 13: Adding An Access Code
3.3 Adding an Access Code While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “Pd” to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished. - Page 14 3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 123456. Press to Confirm or to cancel. To exit or cancel, you can always press OK Button If the two (2) Access Codes you entered does not match, an error message will appear on the screen.
-
Page 15: Deleting An Access Code
3.4 Deleting an Access Code While in Programming Mode, select “2DE” to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Pd” to delete an Access Code. Example Only OK Button Active Access Codes will then be displayed on the screen in sequence from left to right. - Page 16 3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 2 3 4 5 6.
-
Page 17: Checking The Access Codes
3.5 Checking the Access Codes While in Programming Mode, select “3CH” to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right. -
Page 18: Adding A Fingerprint
Not OK Not OK Your Lockly Smart Safe can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you how to add and remove fingerprints if you did not pair your safe with a smart phone. - Page 19 Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior side of Lockly Smart Safe. Once you’re in Fingerprint Registration Mode you will see two numbers displayed on keypad. The top number is your Fingerprint Registration number, in this example above, “1”.
- Page 20 3.6 Adding a Fingerprint (Continued) Please make sure your fingers are clean from dirt and oils before NOTICE scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit “6”...
-
Page 21: Fingerprint Scanning Directions
3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in your Smart Safe is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. - Page 22 3.7 Fingerprint Scanning Directions (Continued) Top View Side View Correct Incorrect SECTION 3.7...
-
Page 23: Fingerprint Scanning Tips
• If wet - wipe excess moisture from finger before scanning • If dirty - wipe stains and dirt off from finger before scanning • Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://Lockly.com/help SECTION 3.8... -
Page 24: Deleting Stored Fingerprints
3.9 Deleting Stored Fingerprints* While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” to delete, press “FP” to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen. -
Page 25: Unlocking With Access Codes
4.1 Unlocking with Access Codes Lockly can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, or physical key supplied with your safe. Slide your hand across the screen to activate the keypad. -
Page 26: Unlocking With Fingerprint
4.2 Unlocking with Fingerprint Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the Safe. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep” sound, Green LED will light up on the fingerprint scanner and Smart Safe will pop and open. -
Page 27: Unlocking Lockly With App
You must have the Lockly iOS or Android app installed in order to unlock with smartphone. ™ Please download the app by visiting the link below or search “Lockly” from the correct app store. Scan or visit Lockly.com/app SECTION 4.3... -
Page 28: Setting Up The Secure Link Wi-Fi Hub
4.4 Setting Up the Secure Link Wi-Fi Hub To set up your Lockly Smart Safe, choose an appropriate location for the Secure Link Wi-fi Hub for optimum performance (see below). For optimum connectivity, it is recommended that the hub be no further away from the Safe than 30 feet (9 meters). - Page 29 Once you have confirmed that your Secure Link Wi-Fi Hub is ready to connect to your Safe, open Make sure you are standing between the Wi-Fi hub and the Lockly App from your smartphone. Lockly Smart Safe , then Add New Device and follow the on screen instructions. SECTION 4.4...
-
Page 30: Connecting Your Lockly Smart Safe
4.5 Connecting Your Lockly Smart Safe The App will take you through the following steps. You will need your activation card that is included in the box to proceed. ADD NEW DEVICE Select A Device Select Lockly Smart Safe GET STARTED... - Page 31 4.5 Connecting Your Lockly Smart Safe (Continued) Plug in your Secure Link Confirm lock password Password setting OK Set the Admin Code and Click "YES" AT&T 9:45 AM 100% AT&T 9:45 AM 100% AT&T 9:46 AM 100% 9:46 AM 100% AT&T...
-
Page 32: Unlocking With Physical Key
4.6 Unlocking with Physical Key Exterior View NOTICE Please keep physical key separately and do not put it in this safe. To unlock your Safe using the physical key (included), insert your key and turn counterclockwise to unlock the Safe. SECTION 4.6... -
Page 33: Safe Mode
4.7 Safe Mode - Overview Lockly will enter Safe Mode when five (5) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the safe status icon will start to flash. To disable Safe Mode, you must unlock the Safe using the correct fingerprint or enter the correct Access Code twice in a row. - Page 34 Option 2 - Lockly App Use the app that is synced to your Lockly Smart Safe to disable Safe Mode. If you have not downloaded the app to use with your Safe, you won’t be able to use this option to disable Safe Mode.
-
Page 35: Shine Mode
4.8 Shine Mode Lockly touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the first button from the left for 3 seconds. -
Page 36: Offline Access Code ™ (Oac)
(OAC) is a unique feature of our Smart Safe. It allows you to grant access ™ to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync ™... -
Page 37: Sub-Admin Access
Sub-Admin Access can be created to grant access for others to be able to control your Safe and grant access to others via Bluetooth when within range of your Lockly smart safe. The sub-admin permission can be setup through the Lockly App then Add A New User. -
Page 38: Important Notes
Activation Code on that card to master reset your Safe in case, for any reason, you have lost the phone paired to Lockly and also forgot your Access Code. Troubleshooting Please visit http://Lockly.com/help for troubleshooting and the most frequently asked questions and answers. SECTION 7.1... -
Page 39: Cleaning
8.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DO and DON’Ts below. DON’T • Don’t use abrasives, high alkaline cleaners, • Rinse the touchscreen with warm water or gasoline to clean your safe. -
Page 40: Safety Precautions
9.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the Smart Safe by yourself. It can cause product damage, void warranty, and cause injuries. - Page 41 FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 42 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. SMART SAFE We’re here to help! help@Lockly.com https://Lockly.com/help UMPGV528W20220808...
- Page 44 Bluetooth ® SIG, Inc. , and any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC., Amazon, Alexa and all related logos are...