Table of Contents
Advertisement
█ Using the FILE LIST Screen
On the Playback Screen, press
Other functions
Sample Rate
Pre-recording
Recording start tone
Automatic playback
volume adjustment
Recorded file export
Line output level
USB Mic
USB file transfer
Timecode
to open the FILE LIST Screen.
The sampling rate used to record files can be set.
Before recording is started, input signals can be captured for a certain amount of time.
Tone signals can be output from the output jacks when recording is started.
Tone signals are also written in recording files.
The volumes of recorded sounds can be evened out without causing distortion during
playback.
Recorded files can be normalized, converted for devices that do not support 32-bit Float
WAV format, and exported.
The line output level can be adjusted.
The M4 can be used as a USB mic. Even during use as a USB mic, the M4 mic sound can
also be recorded to a microSD card.
By connecting with a computer, data on the microSD card can be checked and copied.
Timecode data can be written to recording files.
Timecode signal (LTC) input and output is also supported.
9
This reopens the Playback
Screen.
Use these to select files.
This deletes the selected file.
Advertisement
Table of Contents
