Table of Contents
Advertisement
Troubleshooting
Sound is not output or the volume is very low
→ Check the headphone connection.
→ Confirm that the headphone volume of the M4 is not
lowered.
→ Check the orientation of the mic or the volume set-
tings of the connected equipment.
→ Check the M4 volume amplification on the display.
→ Check the M4 input source settings.
→ Plug-in power must be supplied if the mic connected
to the MIC/LINE IN jack supports plug-in power.
Monitored sound is distorted
→ Adjust the volume amplification on the display.
Built-in mic sound is distorted
→ Move the M4 away from the sound source. Use a
windscreen if air is blown at the mic.
Input 1/2 sound is distorted
→ Adjust the volume of the connected device, and con-
firm that the M4 input source setting is correct.
Product names, registered trademarks and company names in this document are the property of their respective companies.
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
Recording is not possible
→ Confirm that the microSD card has open space.
→ Confirm that a microSD card is loaded properly in the
card slot.
Recorded sound breaks up
→ Use the M4 to format the microSD card.
→ Test the microSD card.
See the Operation Manual for details.
→ We recommend using microSD cards that have been
confirmed to operate with this recorder.
See the ZOOM website (zoomcorp.com) for informa-
tion about microSD cards that have been confirmed
to work with this unit.
Not recognized by computer when connected
→ Use a USB cable that supports data transfer.
zoomcorp.com
Z2I-4723-01
Advertisement
Table of Contents
