Display Elements And Symbols; Display Elements - VOLTCRAFT VC252 Operating Instructions Manual

11 Display elements and symbols

The following symbols and letters appear on the device/display. Other symbols may
appear on the display (display test), but these have no function.

11.1 Display elements

Element
TRMS
M
k
Ω
Hz
n
m
V
µ
A
F
LoZ
Auto
DC
Description
True RMS measurement
Delta symbol for relative measurement (= reference measure-
ment)
Mega symbol (exp.6)
Kilo symbol (exp.3)
Ohm (unit of electrical resistance)
Hertz (unit of frequency)
Nano symbol (exp.-9)
Milli symbol (exp. -3)
Volt (unit of electrical voltage)
Micro symbol (exp. -6)
Ampere (unit of electrical current)
Farad (unit of electrical capacity)
Automatic power-off function is enabled
Diode test symbol
Symbol for the acoustic continuity tester
Low impedance symbol
Terminal assignment indicator
Automatic range selection is enabled
Battery status indicator
Hold function is enabled
Direct current symbol ( )
Polarity indicator for current flow direction (negative pole)
61