Moes AM43 Manual Instruction

Enjoy Our Smart Life
2.Motor Specifications
Model
AM43-0.45/40-ES-EZ(TY)
3.Motor llustration
4.Installation
1 Do not exposure it under strong direct sunshine.Keep the
blind engine far away from high temperture or wet place
for using or storing.
3 Tighten the cords or chains to driving gear.
Please leave 3-5mm space
between the bottom position
and support bracket during
installation.
4 Blind engine fixing plate installation options
1.3M adhesive
Solar panel
Input Power
specs
DC charger 8.4VDC 12V/0.3W
Indicator
UP DOWN
Remove the cover plate of driving gear
2.Screw fixing
AM43 Blind Drive Motor
Manual Instruction
1.Features
Motor can set upper & bottom limit positions and limits can be saved even
1
when motor power off;
Tow running modes: tilt & lift mode. Default mode is tilt;
2
Smart phone APP control;
3
Zigbee Bi-direction technology, instant shades status can be showed on APP;
4
Motor speed is adjustable on the APP;
5
Large battery capacity supports long time working;
6
Powered by charger or solar panel, the solar panel with built in light
7
sensor for auto-control;
Lock-rotor
Speed Range
current
1.8A 20-50rpm
Setting button
Charging port
2 Choose compatible driving gear
Thin cord strings and
small bead chains
5 Remove the teeth where from the cord or chains come out on cover plate;
then lock the cover up
Protection
teeth
6 Connect the solar panel or sensor to blind engine; Please pay attention
the wires in case wires wrapping.
Correct installation
1
Torque Rated Current Battery Capacity
0.45Nm 1A 7.4VDC/1000mAh
Solar & sensor connecting port
Thick cord
Large bead chains
strings