Ryobi R36XEDG10 Manual page 13

3. Push the blade change lock button to
lock the blade assembly. Loosen the
flange nut using a wrench.
4. Remove the flange nut, outer flange, and
blade from the motor shaft. Align and
install the new blade on the inner flange,
making sure that the blade sits flat. Install
the outer flange and flange nut.
5. Push the blade change lock button to
lock the blade assembly. Tighten the
flange nut into place using a
6. Insert the locking pin through both slots
to lock the inner flange and motor ring.
3
wrench.
4
5
6
1 2
1
1 2
Maintenance
3
2
3
13