HDX SL-WSUS-136 Use And Care Manual

WARNING
!
Unit must be placed on a level surface or
leveled with included hardware (when
applicable).
Do not sit or stand on or allow children to
climb, sit or stand on the assembled
product.
For safety reasons, it is imperative that this
unit be mounted on the wall or floor.
Unit can tip over causing severe injury or
death.
Do not exceed the recommended weight
limits.
Evenly distribute the weight on each level
and always keep the heavier loads on the
bottom.
Before cutting, drilling or hammering into
any wall or floor surface, verify the location
of electrical, plumbing and gas lines.
Cutting may cause serious injury.
5
Tip resistant kit
Fix to wall to prevent tipping over.
Screw anchor (G) in wall at the height of the top shelf.
Put washer (F) over screw (H), install the
screw (H) to the wall and connect the
washer (F) & the unit.
Electric drill is needed but not provided.
ITEM#SL-WSUS-136
SKU#525441
F- Washer x 1 G - Anchor x 1
H - Screw x 1
F
H
650
G