Advertisement
Step 1
Turn the Base on its top. Insert the
Legs withLevelers into threaded hole
in Bracket, which is already attached
to the Base. S et Base aside.
Note:
If using casters, do not install leveling
legs. Thread caster directly
into the bracket .
Step 2
Attach (2) Slatwall Panels
together using (4) Hex Bolts by
aligning the predrilled holes with
each other in a T-shape. Thread
the Hex Bolts loosely until all
(4) Bolts are inserted, then
tighten securely.
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Step 3
Attach the third Slatwall Panel
to the already assembled
Panels using (4) Hex Bolts.
Thread the hex bolts loosely
until all (4) Bolts are inserted,
then tighten securely.
Step 4
Set the assembled Slatwall Panels on
top of the Base lining up the Center
Square Opening with the Square Block
that is attached to the Base. Firmly push
the Assembled Slatwall Panels down
ensuring that there are not any gaps
between the Pinwheel and the Base.
Page 2 of 2
Advertisement
