MSI 945GCM5 Series User Manual page 52

Re-Call VGA BIOS from S3
W hen ACPI Standby State is set to [S3], users can select the options in this field.
Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system
wakes up (resumes) from S3 sleep state. The system resume time is shortened
when you disable the function, but system will need an VGA driver to initialize the
VGA card. Therefore, if the VGA driver of the card does not support the initialization
feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (M inute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off.
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power On/Off]
[Suspend]
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Last State]
High Performance Event Timer
High Performance Event Timer (HPET) is needed to allow OS to discover event timers
and establiish basic timer services for driver load.
HPET M emory Address
This item allows you to allot the Event Timer Block Registers Base Address to the
memory.
Wakeup Event Setup
Press <Enter> to enter sub-menu and the following screen appears.
The power button functions as a normal power-on/-off
button.
W hen you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.
BIOS Setup
3-15