Front Panel Connectors: Jfp1/Jfp2; Front Panel Audio Connector: Jaud1; Serial Port Connector: Jcom1 (Optional) - MSI 915GVM-V Instruction Manual

and should be connected to the +12V, the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for the proper CPU cooling fan.

Front Panel Connectors: JFP1/JFP2

The mainboard provides two front panel connectors for electrical
connection to the front panel switches and LEDs. JFP1 is
compliant with Intel Front Panel I/O Connectivity Design Guide.

Front Panel Audio Connector: JAUD1

The front panel audio connector allows you to connect to the front panel audio
and is compliant with Intel ® Front Panel I/O Connectivity Design Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have
to be jumpered in order to have signal output directed to the rear audio ports.
Otherwise, the Line-Out connector on the back panel will not function.
Front USB Connector: USB2/USB3
The mainboard provides two standard USB 2.0 pin headers JUSB2&JUSB3. USB2.0 technology
increases data transfer rate up to a maximum throughput of
480Mbps, which is 40 times faster than USB 1.1, and is ideal for
connecting high-speed USB interface peripherals such as USB
HDD, digital cameras, MP3 players, printers, modems and the
like.
MSI Reminds You...
Please note that the pins of VCC & GND must be connected correctly, or it may cause some
damage

Serial Port Connector: JCOM1 (Optional)

The mainboard offers one 9-pin male DIN connector COM 1 (on the rear panel), and
one optional serial port JCOM1. Both are 16550A high speed communication ports
that send/receive 16 bytes FIFOs. You can attach a serial mouse or other serial
device directly to them.
8
1 2
9 10