Table of Contents
Advertisement
2-3-3-1-6 Phy Configuration
Parameter
Phy Configuration
PMU Training
BIOS Setup
Description
Press [Enter] to configure PMU Training.
DFE Read Training
Š
– Perform 2D Read Training with DFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.
FFE Write Training
Š
– Perform 2D Write Training with FFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.
PMU Pattern Bits Controls
Š
– Options available: Auto, Manual. Default setting is Auto.
- 84 -
Advertisement
Table of Contents
