MSI RG54GS2 User Manual page 78

4.2DUT authenticate PC2 using PEAP-TLS.
1. PC2 choose the SSID of DUT as the Access Point.
2. Set authentication type of wireless client and RADIUS server both to
3. Disable the wireless connection and enable again.
4.The DUT will send the user's certificate to the RADIUS server, and then
5. Windows XP will prompt that the authentication process is success or fail
6. Terminate the test steps when PC2 get dynamic IP and PING remote host
Support Type:
The router supports the types of 802.1x Authentication:
PEAP-CHAPv2 and PEAP-TLS.
Note.
1.PC1 is on Windows XP platform without Service Pack 1.
2.PC2 is on Windows XP platform with Service Pack 1a.
3.PEAP is supported on Windows XP with Service Pack 1 only.
4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is
enable.
Figure 6: Authentication success
PEAP_TLS.
send the message of authentication result to PC2.
and end the authentication procedure.
successfully.
73