Table of Contents
Advertisement
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The draining heights are: minimum:
60 cm, maximum: 100 cm
Siphon
Sink
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 26.
Installation and connection en
Plastic pipe with
rubber sleeve
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
To align the appliance, turn the ap-
2.
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 26.
15
Advertisement
Table of Contents
