Standby Mode; Talking To Another Party; Talk Confirmation Tone - Cobra MicroTalk microTalk Professional 2-Way Radio Operating Instructions Manual

Cobra PR 2000 manual M(4217)A
Operation
Talking to
Another
Party
Note
While PTT Button is depressed
you cannot receive incoming
Press and hold
calls.
Th e ( ) i con will appe a r.
Note
When you release the PT T
Button,the person you are
talking to will hear a tone indi-
cating that it's ok to talk. See
Talk Confirmation Tone section
on page 11.
Hold mic about 2 inches from mouth.
Speak in a normal voice.
Release
for response.
10
12/4/00 4:18 PM Page 10
PRESS AND
HOLD
PTT Button.
RELEASE FOR
RESPONSE
PTT Button and listen

Talk Confirmation Tone

Your listener will hear an audible
tone when you release
the PTT Button.
This alerts the other party t h at
you are finished talking and it's
OK for them to begin talki n g.

Standby Mode

When finished talking, Release
receive incoming transmissions.
Your microTalk Professional is always in the stand-
by mode when the PTT Button is not pressed
and you are not in function mode. See Advanced
Features section on page 16.
Operation
Talk
Confirmation
Tone
Standby Mode
PTT Button to
11