Operation - sunjoe 24V-PRN1-CT Operator's Manual

Fig. 7

Operation

IMPORTANT! The product is intended for light pruning of
shrubs and hedges of residential properties.
m
WARNING!
The blades continue to move after releasing
the trigger. Turn off the tool and wait until the blades come to a
complete stop before adjusting or cleaning.
m
CAUTION!
Wear protective gloves while working
with the pruner. Never touch the blades while the tool is in
operation and be aware of the sharp edges even when the
pruner is not in use.
Handheld Pruner Operation
1. Slide the battery into the removable battery compartment
until it clicks into position (Fig. 8).
Fig. 8
2. Grip the pruner with your dominant hand. Squeeze the
safety lock button on the handle to unlock the trigger.
When you are ready to make a cut, pull the trigger to close
the blades. Release the trigger to open the blades (Fig. 9).
Connecting lock button
HANDHELD
PRUNER MODE
Battery
Removable battery
compartment
Fig. 9
Trigger switch
Safety lock button
Pole Pruner Operation
Telescoping pole sold separately. See the optional accessories
page for more information.
m
CAUTION!
Remove the battery before adjusting the
length or angle of the telescoping pole.
1. Flip up the cam-lock, and extend the pole to the desired
length. Close the cam-lock to secure it in place (Fig. 10).
NOTE: The telescoping pole extends up to 5.83 ft
(1.78 m).
Fig. 10
Cam-lock
2. To adjust the angle of the pruner in pole pruner mode,
hold down the rotation button and turn the pruner to your
desired angle. Release the button and make sure the
pruner is locked at that angle (Fig. 11-12).
Fig. 11
Rotation
button
8
HANDHELD
PRUNER MODE
Telescoping pole