Advertisement
The SaeboGlide hand strap is a specially designed strapping system for individuals who have
decreased gripping ability. The steps below describe how to put on the hand strap as well as how to
attach it to your SaeboGlide.
1) Open the hand strap and
place on your lap or flat surface
with the soft Velcro side of
large strap facing up.
3) Pull small left strap over
hand and fasten with small
right strap (adjust for snug
fit).
5) Thread the SaeboGlide pole through the
loop on the palm side and position directly in
the center of the gliding sleeve. Place the O-
rings on both sides of the sleeve so it does not
move.
SAEBOGLIDE PLUS
The small strap can be adjusted
to accommodate hand size. To
adjust, move the strap closer or
further from the wrist
until it is in the position shown
here.
2) Place your affected hand
(palm side down) on top of the
center strip so the wrist strap is
just below the hand.
4) Pull large left strap over
wrist and fasten with large right
strap (adjust for snug fit).
6) Tighten the hand strap by pulling
towards you. Secure the strap by folding
over onto the Velcro.
Advertisement
