Talking To Another Party - Cobra MicroTalk How To Use Manual

310WX.MANUAL.qx copy 6/17/99 12:18 PM
Operation
Talking to

Talking To Another Party

Another
To send your outgoing message:
Party
Note
Both units must be on same
channel and subchannel to
Turn on your MicroTalk 2-way radio.
1
communicate.
An audible "tone" will indicate the unit is on.
The LCD will go through a 3 second self test
and then go to operational mode.
12
Page 12
2 Place antenna in full
upright position.
Push and hold button.
3
The i con will appe a r.
4
Hold mic about Release
5 6
2 inches from and listen for
mouth. Speak in response.
a normal voice.
Operation
Note
While PTT button is
depressed you cannot
receive incoming calls.
Note
When you release the
PTT button,the person you
button
are talking to will hear a
tone indicating that it's ok
to talk. See Talk
Confirmation Tone section
on page 14.
13