Canon EOS 55 Service Manual page 102

ASSEMBLY
&
DISASSEMBLY NOTES
I
NOTE
■
:
Eyepiece Unit Removal
Part 3: Repair Information
There are two different eyepiece units, for cameras with and without Eye-control AF.
When removing the Eye-controlled Focus Eyepeice, the main flex comb connector must
be unsoldered.
Eye-controlled Focus Eyepeice
Normal Eyepeice
Fig. 3-14 Eyepiece Units
I NOTE
II :
LCD Unit Removal
1.
Remove the AF mode dial flex (3) (one screw). and unsolder the main flex comb con-
nector.
2. Remove the right end (vertical) strap lug(4) (2 screws).
3. Unsolder the back cover flex (Fig. 3-15).
4. Unsolder the viewfinder LCD flex.
5. Unsolder three leads from the remote terminal (Fig. 3-15).
6. Unsolder the release flex and electronic control dial (Fig. 3-15).
7. Unsolder the DC/DC flex.
Fig. 3-15 LCD Flex
3-11
, ack Cover
I
lex Contacts
,,,