Door Reversal Instructions - Danby DFF116B1WDBL Owner's Manual

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the refrigerator is placed on its back or side during this process it must
be allowed to stand upright for 6 hours before plugging in to avoid
damage to internal components.
1. Remove the screw hole cover from the top left side of the cabinet.
Remove the upper hinge cover and the upper hinge from the top right
side of the cabinet. Remove the freezer door from the cabinet.
2. Remove the hinge pin from the upper hinge. Flip the upper hinge
over. Reinstall the hinge pin on the opposite side of the hinge.
3. Remove the center hinge from the cabinet. Remove the refrigerator
door from the cabinet.
4. Move the hinge hole sleeve from the top right side of the refrigerator
door to the top left side of the refrigerator door. Move the hinge hole
cover from the top left side of the refrigerator door to the top right
side of the refrigerator door.
5. Move the screw hole covers from the center left side of the cabinet to
the center right side of the cabinet.
6. Remove both adjustable feel from the bottom of the cabinet.
7. Remove the lower hinge from the bottom right side of the cabinet.
8. Move the screw hole covers from the bottom left side of the cabinet to
the bottom right side of the cabinet.
9. Remove the hinge pin from the lower hinge. Flip the lower hinge over
and install the hinge pin on the other side. Install the lower hinge on
the lower left side of the cabinet.
10. Install both of the adjustable feet on the bottom of the cabinet.
11. Install the refrigerator door on the cabinet. Flip the center hinge and
install it on the center left side of the cabinet.
12. Install the freezer door on the cabinet. Install the upper hinge and the
upper hinge cover on the top left side of the cabinet. Install the screw
hole cover on the top right side of the cabinet.
8