Door Reversal Instructions - Danby DCR033B2WM Owner's Manual

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge.
Remove the hinge hole covers from the top left
side of the cabinet. Remove the door from the
cabinet.
2. Remove the hinge hole cover from the top left
side of the door and install it in the hinge hole
on the top right side of the door.
3. Remove both adjustable feet. Remove the lower
hinge from the cabinet. The lower hinge must be
turned over before being reinstalled.
4. Install the lower hinge on the left side of the
cabinet. Install the door on the cabinet.
5. Before tightening the screws on the upper hinge,
ensure than the top of the door is level with the
cabinet and that the rubber gasket is making a
good seal. Install both adjustable feet. Install the
screw hole covers on the top right side of the
cabinet.
IMPORTANT
Ensure that the door is fully closed when the
appliance is in operation. Failure to fully close
the door can lead to excessive condensation
and potential water damage to fl ooring under
the appliance. Danby will not be responsible for
damages from misuse.
1
2
3
4
4
5