NAV TOOL NAVRGB6.0-VI Installation Manual
Toyota prius 2004-2005
Hide thumbs
Also See for NAVRGB6.0-VI:
- Installation manual (7 pages) ,
- Installation manual (13 pages) ,
- Installation manual (7 pages)
Advertisement
Quick Links
Manual Version: 1.0
NOTICE: We recommend having this installation performed by a certified technician.
All product names, logos, brands, trademarks and registered trademarks are
property of their respective owners.
Installation Manual
(NAVRGB6.0-VI+TL10)
Toyota Prius 2004-2005
NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100
DESIGNED + MANUFACTURED IN THE
1
Advertisement
Related Manuals for NAV TOOL NAVRGB6.0-VI
Summary of Contents for NAV TOOL NAVRGB6.0-VI
- Page 1 Installation Manual (NAVRGB6.0-VI+TL10) Toyota Prius 2004-2005 DESIGNED + MANUFACTURED IN THE Manual Version: 1.0 NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
-
Page 2: Important Warning
WELCOME Precautions IMPORTANT WARNING PLEASE READ BEFORE YOU START THE INSTALLATION Failure to follow these instructions carefully or not installing the interface • Please study these instructions carefully before installing the interface. as described could cause damage to the vehicle or safety systems on the •... -
Page 3: What's In The Box
What’s In The Box? Push Button Interface (Part # NT-PUSH-BTN) (Part # NAVRGB6.0-VI) Vehicle Specific Interface Harness Plug and Play Harness (Part # NT-WHNT6) (Part # NT-TL10) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 4 Quick Connection Diagram Quick Connection Diagram ON 1 Click Switches 1 and 2 UP Click Vehicle’s Navigation System Location Sedans: Trunk SUVs: Under Front Seat Factory Harness Do Not Connect (Part # NT-TL10) Behind Radio or Behind Screen NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 5: Installation Instructions
Installation Instructions Step 1: Locate the Vehicle’s DVD-ROM Navigation System. (Located in the trunk for sedan vehicles, located under the front seat for SUV vehicles) (Vehicle disassembly may or may not be required depending on the vehicle) Step 2: Disconnect the 10 Pin Connector from the back of the Vehicle’s DVD-ROM Navigation System. Step 3: Connect the female end of the Supplied Vehicle Specific Harness TL10 into the Factory Harness you disconnected. -
Page 6: Testing And Operation
Testing and Operation Step 1: Turn on the ignition. A green LED will light up on the interface to confirm it has power. Step 2: Press the push button once to turn on and display Video 1. Skip this step if only using reverse camera. (If no video source is connected you will see a “no signal”... - Page 7 User Manual You do not need to use the push button if only a reverse camera was installed The reverse camera will automatically display when the vehicle is placed in Reverse. It will automatically Turn OFF when the vehicle is placed in any other gear and will display the factory screen. To View Video 2 (Front Camera if Installed) If no video source is connected you will see a “No Signal”...