Advertisement
Quick Links
Installation Manual
BMW 1 Series 2008
Interface with HDMI
Part #: NAVTOOL6.0-LB0-HDMI
NOTICE: Navtool recommends having this installation performed by a certified technician.
Logos and trademarks used here in are the properties of their respective owners.
1
BMW 1 Series 2008
Advertisement
Related Manuals for NAV TOOL NAVTOOL6.0-LB0-HDMI
Summary of Contents for NAV TOOL NAVTOOL6.0-LB0-HDMI
- Page 1 Installation Manual BMW 1 Series 2008 Interface with HDMI Part #: NAVTOOL6.0-LB0-HDMI NOTICE: Navtool recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. BMW 1 Series 2008...
- Page 2 WELCOME Table of Contents IMPORTANT WARNING Installation Instructions This product includes instructions for Precautions installation, which must be carefully followed. The instructions are worded in such a manner to assume that What’s In The Box the installer is capable of completing these types of electronic installations.
- Page 3 Precautions PLEASE READ BEFORE YOU START THE INSTALLATION • Please study these instructions carefully before installing NavTool interface. • Many new vehicles use low-voltage or data-bus systems that can be damaged by test lights and logic probes. Test all circuits with a digital multi-meter before making connections. •...
- Page 4 What’s In The Box? Vehicle Specific Plug and Play Harness NavTool Interface NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) (Part # NT-QUADLOCK-V1) (Part # NAVTOOL-BMWRLY) Vehicle Specific NavTool Interface Harness Plug and Play Harness NavTool Interconnect Cable (Part # NT-WHNT6) (Part # NT-BMWDRV) (Part # NT-EXT-BOX) USB Configuration Cable AUX Cable...
- Page 5 Interface Connectors Description Main Connector for USB Port for Universal Interface Apple CarPlay and Harness Android Auto Main Connector for Screen Interface Module Configuration Port HDMI Port NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Data LED HDMI LED Power LED Main Connector for Universal Interface Harness- This port is dedicated for a connection of a universal wiring harness. Main Connector for Screen Interface Module- This port is dedicated for a connection of a screen interface module.
- Page 6 Universal Harness Description Rear Camera Input/ Video Input 1 Front Camera Input/ Video Input 2 NavTool Interface Harness (Part # NT-WHNT6) Left Camera Input/ Video Input 3 Right Camera Input/ Video Input 4 Connector for Vehicle Specific Harness 12V Output Wire Manual Activation Wire Connector for Controller Connector for Microphone Input...
- Page 7 Quick Connection Guide NavTool Interface See Page 8 See Page 2 (Part # NAVTOOL6.0-LB0-NBT) Click NavTool Supplied Harness (Part # NT-WHNT6) AUX Input jack installed in your car from the factory Click See Page 8 See Page 2 Factory Wire Back of Car Radio (See Page 9) Remove Fiber Optic Cable from the factory plug and insert into the supplied plug and play harness (See Page 3)
- Page 8 Quick Connection Guide 2 NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Click NavTool Interface Harness (Part # NT-WHNT6) NavTool Interconnect Cable (Part # NT-EXT-BOX) Click NavTool Interface (Part # NAVTOOL-BMWRLY) Click Click Vehicle Specific Plug and Play Harness (Part # NT-QUADLOCK-V1) Vehicle Specific End view of harness Plug and Play Harness NT-QUADLOCK-V1...
- Page 9 Quick Connection Guide 3 How to Relocate Fiber Optic Cable Vehicle Factory Harness Vehicle Factory Harness Vehicle Factory Harness Vehicle factory harness with fiber Insert small screwdriver or a pick tool Gently pull the fiber optic plug out. optic cable inserted between the lock and the fiber optic assembly plug.
- Page 10 Installation Instructions STEP 1 NO APPLICATION OR SOFTWARE DOWNLOAD IS REQUIRED TO CONFIGURE THE INTERFACE. To configure the interface, you must use Windows, Mac, or Google computer. Windows computers must use the latest version of Google Chrome or Microsoft Edge browser. Mac computers must use the latest version of the Google Chrome browser.
- Page 11 Installation Instructions STEP 2 Continued Step 1: Step 2: • Unclip pins (1) on trim (2) in upwards direction • Fit panel popper tool on either side as illustrated. • Unclip control panel (2) with trim (1) at fastening points (4) and pull back. •...
- Page 12 Installation Instructions STEP 3 Step 1: Unplug Factory Harness from the back of the Radio. Factory Harness Back of Car Radio STEP 4 Step 1: Remove the Fiber Optic Cable from the factory plug and insert it into the supplied plug and play harness.
- Page 13 Installation Instructions STEP 5 Step 1: Connect supplied plug and play harness (Part # NT-QUADLOCK-V1) into the back of the radio. Continued on Step 6 Plug and Play Harness Factory Wire (Part # NT-QUADLOCK-V1) Back of Radio (For complete image, see Quick Connection Guide on page 7) Step 2: Reconnect previously removed radio connectors into the back of the radio.
- Page 14 Installation Instructions STEP 7 Step 1: Unplug the factory cable from the back of the vehicle’s screen. Close up view of Back of Car’s Screen Unplug Cable connected into the back of screen Back of the Car’s Screen (For complete image, see Quick Connection Guide on page 8) STEP 8 Step 1: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-QUADLOCK-V1) into the Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV).
- Page 15 Installation Instructions STEP 9 Step 1: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into the back of the vehicle’s screen. Step 2: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into NavTool Interface (Part # NAVTOOL-BMWRLY). End view of harness (Part # NT-WHNT6) NavTool Interface...
- Page 16 Installation Instructions STEP 9 Step 1: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL-BMWRLY). Step 2: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL6.0-LB0-NBT). NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Click Click NavTool Interconnect Cable (Part # NT-EXT-BOX)
- Page 17 Installation Instructions STEP 10 Step 1: Plug-in the RCAs from Vehicle Specific Plug and Play Harness (Part # NT-QUADLOCK-V1) into the AUX port of the vehicle using supplied AUX cable (Part # NT-AUX-35). The product installation is now complete. Do not reassemble the vehicle until testing is fully complete. After you have tested that everything is working, you reassemble the vehicle.
- Page 18 Testing and Settings STEP 1 • Start the car, observe NavTool LED lights should be one blinking blue and two steady lit green LED lights. HDMI LED Data LED Power LED • At this time, your car radio should boot up into its initial state, and the radio should be working. Please check that the radio operates appropriately.
- Page 19 Testing and Settings STEP 2 • On the factory joystick remote (Fig. 1), press and hold the menu button for 3-5 seconds. The interface should emit a chirp and the interface menu (Fig. 2) should appear on the screen. Fig. 1 Fig.
- Page 20 Testing and Settings STEP 4 Camera Settings Rotate joystick to select the Camera Settings option then Camera Settings press enter button on joystick to enter this option. • Image above shows you typical camera settings. • To change camera settings, rotate joystick to highlight the input Step: 1 on the left, once you highlighted desired camera input (rear, front, left, or right), then press enter on the joystick remote to change...
- Page 21 Testing and Settings STEP 5 • Test HDMI input if you are connecting any HDMI video source. • Press the menu button on the factory joystick remote to reveal bottom NavTool menu bar. • Rotate joystick to the right to select HDMI input, press enter on the joystick to enter HDMI mode. •...
- Page 22 Vehicle Reassembly Checklist When performing vehicle reassembly, please make sure to go over the list and checkoff check mark boxes: Check to see if all connectors behind the screen, radio, HVAC etc. were reconnected. Check that LCD screen shuts off with the key off, and turns back on with the key on. Check touchscreen operation.
- Page 23 How to Connect Rear Screens to Car With AV Input Car Monitor NavTool Interface HDMI to AV Adaptor 1 in 2 Out HDMI Splitter HDMI Sources BMW 1 Series 2008...
- Page 24 How to Connect Rear Screens to Car With HDMI Input Car Monitor NavTool Interface Car HDMI Input 1 in 2 Out HDMI Splitter HDMI Sources BMW 1 Series 2008...
- Page 25 User Manual For Consumer Thank you for purchasing NavTool. If you have any questions, please call toll-free at 877-628-8665. The color/navigation screen will display a factory image when you first start your vehicle. • Set the radio to AUX input to hear sound from the HDMI device you connected to NavTool interface. Audio will play via AUX input of the radio.
- Page 26 Setting Radio to Auxiliary Note: If your vehicle is not equipped with AUX input, there is a way to retrofit your vehicle with AUX, contact us for more deatils Set Radio to AUX Audio Input: •Pull the joystick back towards the rear seat to select the Entertainment menu. •Rotate the factory joystick remote to the right and select AUX.
- Page 27 Remote Control Operation Guide Enter Rotate Left Rotate Right Menu Enter- Enters into menus. Rotate Left- Go left inside NavTool menu. Rotate Right- Go right inside NavTool menu. Menu- Click once to go back when on HDMI or Camera Inputs. Press and hold for 3-5 seconds to turn the interface ON when on the car’s factory screen.