H3C SR6600 Command Reference Manual page 37

Transmit pacing: Interval: 20 Count: 3
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
Route preference: 10
ASE route preference: 150
SPF calculation count: 16
RFC 1583 compatible
Graceful restart interval: 120
SNMP trap rate limit interval: 10
Area count: 1 NSSA area count: 0
ExChange/Loading neighbors: 0
MPLS segment routing: Enabled
Segment routing adjacency
Segment routing global block: 16000
Area: 0.0.0.0
Authentication type: None
SPF scheduled count: 4
ExChange/Loading neighbors: 0
Interface: 10.0.0.1 (GigabitEthernet2/0/1)
Cost: 1 State: DR
Priority: 1
Designated router: 10.0.0.1
Backup designated router: 10.0.0.2
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
FRR backup: Enabled
Enabled by interface configuration (including secondary IP addresses)
Interface: 1.1.1.1 (LoopBack1)
Cost: 0 State: Loopback
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
FRR backup: Enabled
Enabled by interface configuration (including secondary IP addresses)
Prefix-SID type: Index
Value: 10
Process ID: ospf 1
Prefix-SID validity: Valid
# Display SRGB information on Router A.
[RouterA] display ospf segment-routing global-block
OSPF Process 1 with Router ID 1.1.1.1
Segment Routing Global Block
Router ID Min SID
4.4.4.4 19000
3.3.3.3 18000
2.2.2.2 17000
1.1.1.1 16000
Count: 7
: Disabled
(MPLS TE not enabled)
Area flag: Normal
Type: Broadcast
Type: PTP
Area: 0.0.0.0
Max SID
19999
18999
17999
16999
31
16999
MTU: 1500
MTU: 1536
Total
1000
1000
1000
1000