CAN SL Series Installation, Use And Maintenance Instruction Manual page 111

The appliance is equipped with a metal base with guides for removing the product from the transport
position to the operating position. The metal base must be firmly fixed to a horizontal surface inside the
installation/storage recess. The support structure on which the metal sliding base is to be mounted must
be made of fire- and heat-resistant material and feature all sturdiness requirements provided for by the
industry technical standards (e.g. EN14749). The fixing surface must be perfectly horizontal (perpendicular
to all surrounding vertical panelling). The metal sliding base can be fixed with suitable self-tapping screws,
to be inserted into the appropriate fixing holes in the lower part of the base metal structure.
For this type of installation you will need a cordless drill,
screwdriver, self-tapping screws (compatible with the holes
and the type of support) as well as suitable PPE.
A
30 mm
1
ATTENTION!
The panelling near the appliance could be overheated during operation due to the presence of
burners and cooking pans: make sure that these surfaces are fireproof and do not deteriorate
with heat.
ATTENTION!
Do not install systems with free cables inside the appliance installation/storage recess: sliding
on the guides could cause the protective sheaths of pipes or power cables to be abraded or
even broken off.
Adhere to the installation dimensions and safety distances specified in this manual. Any deviation therefrom
could lead to dangerous situations for the installer and the user. fsdf
ATTENTION!
Always keep the appliance at a safe distance, when in use, from combustible materials such
as: awnings, upholstery, etc.
A
2
Installation, use and maintenance instruction manual
EQUIPMENT REQUIRED
A - A
3
▪
Ed. 11/2019 Rev. 00
39