Care & Maintenance - Hover-1 MY FIRST FORKLIFT Operation Manual

CARE & MAINTENANCE
• Only use the charger and battery speci ed by the manufacturer. The charging port is located under the seat.
• Before charging, check the charger, battery, and plug for any damage. If anything is damaged, stop using the vehicle until it is repaired.
• Do not turn the vehicle on while charging and don't turn the battery upside down.
• While charging, the charger will warm up. If the charger does not warm up, the charger, battery, or circuit may have failed.
1. Before use, check to ensure the My First Forklift is in good condition. Check for damage to the battery, wires, and other parts of the
forklift. Check to ensure all screws are tight and that there are no potential safety hazards in the operation area. If any damage is
found, stop using the vehicle until all damage is repaired.
2. If the remote control is not used for an extended period of time, it is recommended that you remove the batteries to avoid battery
leakage, corrosion of the circuit board, and/or damage to the remote control.
3. The vehicle should be parked indoors or covered with waterproof tarp to avoid water damage.
16