UFESA Monza Instruction Manual page 20

button will pulse as the machine begins preheating. When the 1 cup button, 2 cup button
and manual button illuminate solidly, the preheating is finished.
5. Press manual button, the appliance will pump water for about 30s, water will pass
through the system, then pour out in the mug and clean them thoroughly. Dispose of the
water and repeat the process a further 3 times or more.
Place the steam wand into a mug or jug and slowly turn the steam control knob until water
dispenses, keep the steam control knob open for at least 30 seconds and close the steam
control knob. Take care performing this process as the hot water will pulse into the recep-
tacle, and it may emit steam. Now the appliance is ready for making coffee.
Note: There may be noise when pumping water for the first time or after a long time not
used, it's normal that appliance is releasing the air inside. After about 20s, the noise will
disappear.
MAKE ESPRESSO COFFEE
1. Remove funnel by turning it clockwise. Add ground coffee into steel mesh (1cup) with
measuring spoon, a spoon of ground coffee power can make about a cup of top-grade
espresso coffee, then press ground coffee powder tightly with the tamper. Use the 2 cups
filter for 2 cups of coffee.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove
in the appliance, then insert the funnel into the appliance from the "UNLOCK" position, and
fix them into appliance firmly by turning it anticlockwise until it is at the "LOCK" position.
20