Daro Saphir Series Installation, Operating And Maintenance Manual page 15

|
01787 370187 info@darouv.co.uk
7 Press the red button again to access "switch cycles". This records
the number of power downs of the system. Press the white button to
clear and the red button to confirm.
8 Press the red button again to access "startup time". This sets a delay
from power up to when monitoring starts. (Please note alarms are not
activated until lamps have warmed, and output has risen.)
9 Press the red button again to adjust the display contrast.
|
darouv.co.uk
Saphir Pro
15