Daro Saphir Series Installation, Operating And Maintenance Manual page 12

Saphir Pro
Setup & Calibration - Saphir Pro Models
To set up the system must be connected to 230VAC.
Use button red to select menu change. Keep pressing to skip to next parameter.
Use buttons grey or white to change settings for any one parameter. (Grey increases values, white decreases
values.) Hold the buttons down to scroll through values more quickly.
To save changes, scroll through the entire parameter list to reach the final page, "configuration write" and wait
for the settings to be saved.
If you leave the menu for 20 seconds without change, the start display will return and any changes will NOT
be saved.
The system is set with the default lock code "0000". This can be changed to a four-digit code of your choice.
12
| |
01787 370187 info@darouv.co.uk darouv.co.uk