Related Manuals for turck TS700 2UPN8-H1141 Series
Summary of Contents for turck TS700 2UPN8-H1141 Series
- Page 1 Your Global Automation Partner TS700 Compact Temperature Sensors Instructions for Use...
-
Page 2: Table Of Contents
Setting parameter values via touchpads ................ 25 9.2.4 Protecting the sensor with a password................. 26 9.2.5 Parameters in the main menu .................... 27 V01.00 | 2022/06 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 13 Disposal.............................. 33 14 Technical data........................... 34 14.1 TS700-…-LI2UPN8-H1141................... 34 14.2 TS700-…-2UPN8-H1141 .................... 36 15 Turck subsidiaries — contact information.................. 38 V01.00 | 2022/06 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2022/06 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
Screw-in adapter with process connection 1/2″ NPT or G1/2″ male thread TS700…-30-…: 2 AFM flat seals Quick Start Guide Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 6: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 7: Product Description
9.5 [0.37] 37 [1.46] Ø 8 [0.32] G1/2“ Ø 4.5 [0.18] 14.5 [0.57] mm [Inch] Fig. 2: Dimensions in mm [inch] V01.00 | 2022/06 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 8: Properties And Features
The measured temperature value is passed on to the higher-level I/O. The device display shows the temperature value in the unit selected by the user. V01.00 | 2022/06 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Functions And Operating Modes
[ENTER] touch pad. The [MODE] and [SET] touch pads are used to navigate within programming mode. For more information, refer to the chapter “Setting and parameterization.” V01.00 | 2022/06 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Output Functions - Switching Output
(SP) and a release point (rP). The minimum hysteresis is 0.2 K. If the switch- ing point is changed, the release point is adjusted automatically. hysteresis Fig. 4: Behavior of the switching output (hysteresis function) V01.00 | 2022/06 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Output Functions - Analog Output
(analog start point) and AEP (analog end point). The following output configurations can be set: 0…10 V 0…5 V 1…6 V 0.5…4.5 V (rtio) 10…0 V 5…0 V 6…1 V V01.00 | 2022/06 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 12 Fig. 6: Falling output characteristic, MIN ≠ 0 analog output process value Fig. 7: Falling output characteristic, MIN = 0 V01.00 | 2022/06 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 13: Io-Link Mode
When connected to an I/O module, the device detects the pre-defined switching output beha- vior (PNP/NPN) or the analog output characteristic. The auto detect function is activated by default. V01.00 | 2022/06 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Technical Accessories
Technical accessories 4.6.1 Connectivity accessories In addition to the below listed connection cables, Turck also offers other cable types for specific applications with the correct terminals for the device. More information on this is available from the Turck product database at www.turck.de/products... -
Page 15: Installing
„ For TS700…-30-…: After removing and reinstalling the screw-in adapter, use a new seal (replacement seal included in the delivery). V01.00 | 2022/06 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Connection
Fig. 10: Pin assignment TS…LI2UPN… Fig. 11: Wiring diagram TS…2LIUPN… out 2: switch out 1: switch/IO-Link – Fig. 12: Pin assignment TS…2UPN… Fig. 13: Wiring diagram TS…2UPN… V01.00 | 2022/06 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Commissioning
When connected to an I/O module, the device detects the pre-defined switching output behavior (PNP/NPN) or the analog output characteristic. The auto detect function is activated by default. V01.00 | 2022/06 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Operation
NC: Switching point undershot/outside window (active output) Switching output NO: Switching point undershot/outside window (inactive output) NC: Switching point exceeded/within window (inactive output) V01.00 | 2022/06 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Display Indications
Load on the analog output outside the permissible range ErrT Device temperature outside the permissible range Device locked uLoc Device unlocked - - - - Sensor failure V01.00 | 2022/06 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 20: Setting And Parameterization
(PNP/NPN) or analog output characteristic when connected to an I/O module. The auto detect function is activated by default. V01.00 | 2022/06 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 21: Setting Via Touchpads
Use the [MODE] or [SET] touchpads to navigate through the main menu and the EF extended functions menu. A Turck-specific default menu guidance as well as a VDMA menu can be selected. The menu guidance can be set via the SoF parameter. - Page 22 >3 s Undo FACT rEbo >3 s Software version VDMA Save value Fig. 15: Standard menu guidance — EF extended functions menu V01.00 | 2022/06 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 23 Setting via touchpads VDMA menu — main menu Run Mode SP1/FH1 rP1/FL1 SP2/FH2/ASP rP2/FL2/AEP Fig. 16: VDMA menu — main menu V01.00 | 2022/06 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 24 GrEn r-cF Save value PASS >3 s Software version VDMA Save value Fig. 17: VDMA menu — EF extended functions menu V01.00 | 2022/06 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 25: Locking The Device
Current value Chosen Current value parameter Held Save value EF Menu Gradually Acceleration Next parameter Lower value Fig. 18: Setting parameter values V01.00 | 2022/06 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 26: Protecting The Sensor With A Password
Gradually upwards (hex.) Pos. 1 flashes Pos. 2 flashes Pos. 3 flashes Pos. 4 flashes Save new PASS Fig. 20: Password setting V01.00 | 2022/06 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Parameters In The Main Menu
Release point 2 Lower limit value at which output 2 ou2: Hno/Hnc changes its switching state as the temperature falls Default: 70.0 °C V01.00 | 2022/06 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 28 Auto/analog values/rtio signal has its end point Default: 50.0 °C Submenu for additional See table "Parameters in the EF submenu" setting options V01.00 | 2022/06 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 29: Parameters In The Ef (Extended Functions) Submenu
(not a short circuit) event of an error. Binary output: The output is deactivated in the event of an error. V01.00 | 2022/06 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 30 Reset the parameters to the previous settings (last device start) rEbo Device restart (warm start) menu navigation Standard menu navigation VdMA VDMA menu navigation V01.00 | 2022/06 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 31: Setting Via Io-Link
In SIO mode, the device operates in accordance with the most recent setting configured in IO-Link mode. V01.00 | 2022/06 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 32: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V01.00 | 2022/06 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 33: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 12.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 34: Technical Data
Current output 0…20 mA/4…20 mA, each invertible Voltage output 0…5 V/0…10 V/1…6 V/0.5…4.5 V, each invertible Accuracy (Lin. + Hys. + Rep.) ± 0.3 K Repetition accuracy 0.1 K V01.00 | 2022/06 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 35 G1/2″ male nection 1/2″ NPT nection G1/2″ male male thread thread, 2 × AFM flat male thread thread, 2 × AFM flat seal seal V01.00 | 2022/06 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 36 Included in the SIDI GSDML Programming Programming options Automatic switching logic recognition, switching/release point; hysteresis/window mode; NO/NC; unit; IO-Link mapping profile V01.00 | 2022/06 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 37 G1/2″ male nection 1/2″ NPT nection G1/2″ male male thread thread, 2 × AFM flat male thread thread, 2 × AFM flat seal seal V01.00 | 2022/06 | 37 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 38: Turck Subsidiaries - Contact Information
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V01.00 | 2022/06 | 38 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 39 Inönü mah. Kayisdagi c., Yesil Konak Evleri No: 178, A Blok D:4, 34755 Kadiköy/ Istanbul www.turck.com.tr Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.00 | 2022/06 | 39 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 40 Over 30 subsidiaries and 60 representations worldwide! 100020590 | 2022/06 100020590 www.turck.com...
Need help?
Do you have a question about the TS700 2UPN8-H1141 Series and is the answer not in the manual?
Questions and answers