Roger Beep Confirmation Tone - Cobra LI 3900DXC Owner's Manual

Mode Functions
Operation
VibrAlert ® and Call Alert
Your microTALK ® radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
To change call settings:
Mode Button
1. Press the Mode button
until the Call Setting icon
flashes on the display.
The current setting ("01"
Channel Buttons
vibrate + ring, "02" vibrate
only or "03" ring only)
is displayed.
2. Press the Channel Up or
Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button
to enter the new setting
and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
English
22
Introduction
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit
a unique call alert.
VibrAlert + Ring Mode Button
®
VibrAlert Only
® Call Tone Setting
Ring Only
Channel Buttons

Roger Beep Confirmation Tone

Roger Beep is an audible tone that your listener will hear when
you release the Talk button. This alerts the other party that you
are finished talking and it is OK for them to speak.
Mode Button
Roger Beep On
Channel Buttons
Operation
Customer Assistance Warranty
To change a call tone setting:
1. Press the Mode button until the
letter "C" and the current call tone number
(01 through 10) is displayed.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
To turn roger beep on or off:
1. Press the Mode button until the
Roger Beep icon flashes on the display.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode button to enter
the new setting and proceed to other
functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
Nothing Comes Close to a Cobra
•
•
® 23