Hisense Laser Cinema PL1H Series Quick Setup Manual page 18

ADJUST THE UPPER-RIGHT CORNER OF THE IMAGE
1. If the top of the image is lower on the left and higher on the
right, rotate the front-right foot clockwise.
front-right foot
2. Now, rotate the Laser Cinema counterclockwise so that the
bottom of the image is parallel with the screen.
3. Repeat the steps above until the top of the image is parallel
with the screen.
4. If the upper-right corner is inside the screen after adjusting,
rotate the front-right foot counterclockwise, and rotate the
Laser Cinema clockwise, to make the image parallel with the
screen.
ADJUST THE UPPER-LEFT CORNER OF THE IMAGE
1. If the top of the image is higher on the left and lower on the
right, rotate the front-left foot clockwise.
front-left foot
2. Now, rotate the Laser Cinema clockwise so that the bottom of
the image is parallel with the screen.
3. Repeat the steps above until the top of the image parallel
with the screen.
4. If the upper-left corner is inside the screen after adjusting,
rotate the front-left foot counterclockwise, and rotate the
Laser Cinema counterclockwise, to make the image is parallel
with the screen.
10