Trim Tabs - Lowrance LMF-200 Installation And Operation Instructions Manual

4. Use the and keys to enter the amount of fuel you added to
UP DOWN
the tank, then press . You will be directed back to the main
MENU
display.

Trim Tabs

Trim Tabs can only be calibrated from the Trim
Tabs page. If the page is not present in the
scrolling page display, add the Trim Tab page by
following the Adding Pages instructions in
Section 3: Operation.
1. Scroll through the displayed pages until the
Trim Tab page is on the main display.
2. Press , select and press , which will launch
MENU C T MENU
ALIBRATE AB
the following message: Set Tabs Full Up Hit Menu.
3. Adjust the position of the Trim Tabs to the Full Up Position and
press . A second message will appear: Run Tabs Full DN (Down).
MENU
4. Move the Trim Tabs into the full down position. The Trim Tabs are
now calibrated.
29