Download Print this page

Maxair 2099-14 User Instructions

Adapters hard hat

Advertisement

Quick Links

CAUTION
!
Before use, thoroughly read MAXAIR
and available at www.maxair-systems.com.
Symbol Definitions
!
Warning, Caution, or Note
!
WARNING
Failure to follow User Instructions P/N 03521015 and the instructions
contained herein may be hazardous to the user's health.
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and
understand the User Instructions should use MAXAIR Products.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of single use MAXAIR Products.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
®
P/N 2099-14
Part Number
System or component, be sure to be
User Instructions
CAPR
®
P/N 03521015 User Instruction (received with all CAPR Helmets
Intended Use
MAXAIR Hard Hat Adapters are replacement adapters for the front
and sides of MAXAIR 2061-04A Hard Hats.
Hard Hat Adapter Positions
Front Lens Mount,
Vent Clip and Cap
Hard Hat Skirt
2099-14 KIt Components
P/N 02521239 MAXAIR Screwdriver (1)
P/N 01021595 Front Lens
Mount (15)
P/N 01021407 Front Vent
Clip (15)
P/N 01021596 Side Lens
Mount (30)
2099-14 Adapters
Hard Hat
Hard Hat
SideTurn Clip Base,
Turn Clip
Side Snap Post
P/N 01021408 Vent Clip
Cap (15)
P/N 01021404 Side Turn
Clip Base (30)
P/N 01021406 Turn Clip
(30)
P/N 01023672 Rev C Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2099-14 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maxair 2099-14

  • Page 1 P/N 03521015 User Instruction (received with all CAPR Helmets and available at www.maxair-systems.com. Intended Use P/N 2099-14 MAXAIR Hard Hat Adapters are replacement adapters for the front and sides of MAXAIR 2061-04A Hard Hats. Hard Hat Adapter Positions Hard Hat...
  • Page 2 2099-14 Adapters User Instructions Hard Hat Remove a Front Lens Mount and Vent Clip From Hard Hat (HH) 1. From inside the HH, 2. Push the Front Vent 3. From outside the HH, 4. Bracing the front of the HH from...
  • Page 3 2099-14 Adapters User Instructions Hard Hat Remove a Side Lens Mount (Same for both sides of HH) 2. Grasp the Side Lens Mount between thumb and 1. Locate a Side Lens Mount forefinger and pull down and away from the HH.
  • Page 4 Turn Clip and Base. of the Side Turn Clip together be out enough to manually pull it fully out of the skirt from with the MAXAIR Screwdriver flat the outside. blade, and push the turn Clip out of the HH Skirt.