Maxair 2281PR-100ML User Instructions

CAUTION
!
Before use, refer to the CAPR
!
Warning, Caution, or Note
Part Number
!
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User's Instructions should use this product.
Failure to follow the User's Instructions, these and in the MAXAIR
Systems User's Instructions, P/N 03521015, may be hazardous to
the user's health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales Representa-
tive, or call BMDI customer service at 1-800-443-3842.
User Instructions
User's Instructions, P/N 03521015 (received with all CAPR Helmets) for details.
®
P/N 2281PR-100ML
REF 07631127
P/N 2281PR-100SM
REF 07631126
NIOSH Number
System or component, be sure to be
Intended Use
The MAXAIR CAPR 2281PR-100 Hoods are for use with MAXAIR
® ®
2084-03 Helmets with assembled 2099-09 ChinBars. These Hood
Systems provide high efficiency particulate filtration performance, and
360 Head and Neck contact protection.
o
Hoods are designed for single use applications.
Typical System Components
1
4
3
1. 2084-03 Helmet w/2099-02 Chinbar
3. 2500-36TSC Battery
1
5. 2600-01 Battery Charger
The 2500-37TSC is an alternate to the 2500-36TSC.
1
Recommended System Temperature Limits
Use/ 0 C to 54 C at a maximum 80% Relative Humidity
o o
Handling
Charging 0 C to 45 C at a maximum 80% Relative Humidity
o o
Storage 0 C to 35 C at a maximum 80% Relative Humidity
o o
Regulatory
NIOSH PAPR100-N
2281PR-100
Single Hood
2
5
2. 2281PR-100 Hood
4. 2000-76 Battery Belt
P/N 07623093 Rev A Page 1