Lowrance iWAY 600C Quick Start Manual page 6

Top view of adhesive mounting plate, at left. Bottom view (right)
The adhesive plate is important in these cases because the suction cup
base will not hold to textured materials covering most dashboards and
center consoles. The plate's smooth, flat surface provides a secure at-
tachment for the mount's suction cup, while the plate's adhesive pad
holds the entire assembly in place.
WARNING:
If you use the adhesive mounting plate it may be ex-
tremely difficult to remove. If you remove the plate it
could leave remnants of the adhesive pad or you could
damage the surface it was attached to.
Determine Plate Location
Once attached, the plate's adhesive pad is difficult or impossible to re-
move. It's important to select the proper location before removing the
adhesive backing. To select a mounting location for the adhesive pad,
connect the GPS unit and mounting arm together. Then attach the
mounting arm's suction cup to the adhesive plate. Hold the entire as-
sembly at the desired location to check how it fits. Make sure the flex
arm can be positioned for easy use.
Attach the mounting arm's suction cup (left) to the adhesive plate. The
flexible suction cup mount (right) locked to the adhesive plate.
shows adhesive pad with paper backing.
5