ViewSonic LS610WH Series User Manual page 53

Menu Option
HDMI Settings
LAN Control Settings
Description
HDMI Format
Select a suitable color space according to the color space
setting of the output device connected.
ͫ Auto: Sets the projector to detect the color space setting
of the input signal automatically.
ͫ RGB: Sets the color space as RGB.
ͫ YUV: Sets the color space as YUV.
HDMI Range
Select a suitable HDMI color range according to the color range
setting of the output device connected.
ͫ Auto: Sets the projector to detect the HDMI range of the
input signal automatically.
ͫ Enhanced: Sets the HDMI color range as 0 - 255.
ͫ Normal: Sets the HDMI color range as 16 - 235.
LAN Settings
ͫ DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address,
DNS Server settings will be automatically retrieved.
ͫ Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
53
Subnet Mask, Default Gateway,
Only available when LAN Settings is
set to Static IP. Use
column and use
value.
/ to select a
/
to adjust the