Locking The Control Keys - ViewSonic LS610WH Series User Manual

Forgetting the Password
If the password function is activated, you will
be asked to enter the six-digit password every
time you turn on the projector. If you enter the
wrong password, the password error message,
as pictured to the right, will appear for 5
seconds, and the message 'INPUT PASSWORD'
follows.
You can retry or if you do not remember, you can use the "Password Recall
Procedure".
NOTE:
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down for a short time.
Password Recall Procedure
1. When the message 'INPUT CURRENT
PASSWORD' appears, press and hold
Auto Sync for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your
projector.
3. Seek help from the local service center to
decode the number. You may be required to
provide proof of purchase documentation to
verify that you are an authorized user of the
projector.

Locking the Control Keys

With the control keys on the projector locked, you can prevent your settings from
being changed accidentally (by children, for example).
NOTE:
When the Panel Key Lock is On, no control keys on the projector will operate
except Power.
1. Press Menu to open the OSD Menu and go to:
2. Press / to select On.
3. Select Yes and press Enter to confirm.
4. To release panel key lock, press and hold on the projector for 3 seconds.
NOTE:
You can also use the remote control to enter the
menu and select Off.
SYSTEM
SYSTEM
22
> Panel Key Lock.
> Panel Key Lock