Advertisement
Open the folder: "IDSCAN_CD"
INSTALL THE DRIVER USB
1) Open the folder "MCP2200WindowsDriver".
2) In "DriverInstallationTool" select "X64" forr 64bit or "X86" for 32 bit.
Launch "MCP2200DriverIstallationTool". Press "Install" and wait for the end of the driver installation.
INSTALL COM PORT ON PC
1) Turn off the READER. Insert the USB connector and turn on the READER.
2) Begin he installation of a new device. Wait for the complete installation of the assigned COM PORT.
Turn on IDSCAN.
Will appear on the LCD:
Now double click on the icon
- Set the COM PORT and the bit rate at 19200.
- Press UPLOAD PROGRAM.
- Select the file IDSCAN_5.x.BIN
- Set the Reader address to which to send the program.
- Press START and wait for the text (Upload OK).
- Turn off the READER.
To upgrade the TEXT in different languages repeat the before operations selecting "Upload Language"
and load the file "IDSCAN_5.x.txt".
TRIPLE FREQUENCY
READ DISTANCE
DISPLAY LCD
ACOUSTIC WARNING
BATTERY
DATA TRANSMISSION 19200-8-N-1
OPERATING TEMPERATURE
DIMENSIONS
WEIGHT
INOUT RFID s.r.l
Phone:+39 02.95138.139
Email:
info@inoutsrl.it
FIRMWARE AND TEXT UPGRADE
USB Connected
Operate from PC
to launch the program "EK20 UPLOADER".
TECHNICAL SPECIFICATION
LF 125Khz
LF max 1,5cm
2 row x 16 chari
Buzzer
LIPO 400mah rechargeable via USB (5VDC). Complete charge: 4hour
USB2.0
-20'C to +65'C
125mm x 70mm x 23mm
170 grammi
Via Milano,14/H
20064-Gorgonzola (ITALY)
Fax:+39 02.95.158.694
Web:
www.inoutsrl.it
HF 13.56Mhz
UHF 868Mhz
HF max 2cm
UHF max 10cm
White-Blue
5
Advertisement
