Settings Area; Available Models - inout EK20-IDSCAN User Manual

SETTINGS AREA

To pass from WORK AREA to SETTINGS AREA and vice versa, hold down the ESC key for 3 seconds.
When enter the SETTING AREA appear the first selection of the MENU list.
1)
Set the SCAN MODE:
LH scan only LF and HF tags.
LU scan only LF and UHF tags.
HU scan only HF and UHF tags.
LHU scan all tags.
L scan only LF tags.
H scan only HF tags.
U scan only UHF tags.
Pressing , the cursor moves on the selection and stores the value.
Scroll down to the next item.
2)
Set the reading mode of an UNIQUE code.
NORM is the INOUT format.
INV is the SOKYMAT format
Pressing , the cursor moves on the selection and stores the value.
Scroll down to the next item.
3)
Set the reading mode for EPC and USER MEMORY of an UHF tag.
ASC the reading is made in ASCII format.
HEX the reading is in HEX format.
Pressing , the cursor moves on the selection and stores the value.
Scroll down to the last item.
4)
Set all the Mifare Cripto KeyA for all Sectors at the default value: FFFFFFFFFFFF
into the reader chip.
Pressing , the cursor moves on the selection and stores the value.
Scroll down to the last item.
5)
Set the power on the UHF antenna between 15dbm to 16dbm (default=1).
Pressing , the cursor moves on the selection and stores the value.
EK20-IDSCAN-LH
EK20-IDSCAN-LHU
The USB interface is always present in all the models.
Example: F040F2B370

AVAILABLE MODELS

Model with LF and HF antennas
Model with LF and HF and UHF antennas.
0F024FCD0E
SC:LH LU HU LHU
L H U
Unique:NORM INV
UHF_E_U:ASC HEX
MIF:ALL KEY DEFAULT
UHF POWER: 1 2 3 4
4