Page 1
Northern Exposure Futon Assembly Instructions PARTS LIST DESCRIPTION QTY. Right Arm Left Arm Back Deck Seat Deck Return Mechanism Log Cross Rail Rectangular Cross Rail Hardware List DESCRIPTION DESCRIPTION BARREL NUTS HAIRPINS 4 ¾” BOLTS WASHERS 3 ¼” CLEVIS PINS WOOD STOPS 2 ¾”...
Page 2
PLEASE READ THROUGH ALL INSTRUCTIONS BEFORE ASSEMBLING! This Northern Exposure is a handcrafted futon frame. It is made of pine. Cracking, twisting, and warping are common characteristics of this wood. Each frame is uniquely different because it is hand hewed. Because cracking, twisting, and warping are characteristics of the wood, they are not considered defects.
Page 3
Northern Exposure Futon Assembly Instructions STEP 4: Wood Pegs go into angled slots. Set the back deck between the arms with the slats facing front. Install back deck by inserting hardwood pegs into the angled slots of both arms. Once this has been completed, all 6 bolts should be tightened tight.
Page 4
Northern Exposure Futon Assembly Instructions STEP 7: Installing Stop Blocks Diagram 7 With your frame in the upright position, hold the stop on the underside of the seat section ends against the log spreader. Seat Section Take a pencil and draw a line across the small end of the stop on the seat section end.