Features; Assembly - Ryobi RY404015 Operator's Manual

PRODUCT SPECIFICATIONS
Motor .....................................................................................................................................................................40 Volts DC
Air Velocity
MPH ...................................................................................................................................... 100 (blower) and 80 (vacuum)
CFM .................................................................................................................................... 600 (blower) and 600 (vacuum)
KNOW YOUR BLOWER/VACUUM
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE HANDLE
The front handle assembly can be adjusted for ease of
operation and to help prevent loss of control.
BRUSHLESS MOTOR
This product features a brushless motor that maximizes
power and performance as well as battery run time.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

LOWER TUBE
The lower tube can be installed on the blower/vacuum with-
out using any tools.
MODE SELECTOR KNOB
Use the mode selector knob to switch from blower operation
to vacuum operation.
SPEED DIAL
The speed dial allows you to quickly adjust air velocity and
turn the blower/vacuum on and off.
SPEED TIP
The speed tip increases air velocity during blower operation.

ASSEMBLY

PACKING LIST
Blower/Vacuum
Lower Tube
Vacuum Nozzle
Shoulder Harness
Vacuum Bag
Speed Tip
Operator's Manual
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create acces-
sories not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
6 — English
WARNING:
WARNING: