Section 5 - Maintaining The Backboard - Ferno Millennia User Manual

Users' Manual

SECTION 5 - MAINTAINING THE BACKBOARD

5.1 Maintenance Schedule
The backboard requires regular maintenance. Set
up and follow a maintenance schedule.
The following chart represents minimum
maintenance.
Disinfecting (this page)
Cleaning (this page)
Inspecting (this page)
When using maintenance products, follow the
manufacturers' directions and read the
manufacturers' material safety data sheets.
To order Ferno disinfectants and cleaners, con-
tact Ferno Customer Service, page 9.
WARNING
!
Improper maintenance can cause injury.
Maintain the backboard only as described
in this manual.
5.2 Disinfecting the Backboard
Wipe all surfaces with disinfectant. Follow
disinfectant manufacturer's directions.
Ferno recommends inspecting the backboard for
obvious damage as you disinfect it.
8
5.3 Cleaning the Backboard
1. Clean all surfaces of the backboard with
2. Rinse backboard with warm water.
3. Towel dry or allow to air dry.
5.4 Inspecting the Backboard
Have your service technician check the following:
•
q Is the backboard free of cracks and
•
q If your service uses speed clips, are all ten
• •
If inspection shows damage, remove the
backboard from service and destroy it to prevent
accidental use of a damaged backboard.
Do not attempt to repair the backboard.
Repairs can cause backboard performance
to be unpredictable. Repairs will void the
warranty.
Millennia™ Backboard
warm water and a mild detergent. Use a
stiff-bristled brush if necessary.
crevices?
speed-clip pins solidly in place and free of
cracks or damage?
Important
© Ferno-Washington, Inc. 234-2019-01 July 1998