Table of Contents
Advertisement
RBS-477DMR DMR/A
NALOG
Paging Reset
Reset the base radio for Paging Decode on Analog channels.
After a Paging Code has been successfully decoded on an Analog channel it will not be required for
subsequent received signals until it has been reset. This can be done by programming a timed automatic reset,
or by resetting with the P2 BUTTON.
•
Press and hold the P2 BUTTON when "Paging Reset" appears on the display. Release the button after the
P a g i n g
double beep is heard on the speaker.
R e s e t
•
The base radio must now receive the Paging Code before receiving voice transmissions from other radios.
•
The selected radio channel must be programmed for Paging Decode for this feature to have any effect.
•
This feature is only available on Analog channels.
Send Contact
The base radio can transmit an Analog Contact code to selectively signal other radios or radio operated
(Analog)
devices.
The P2 BUTTON can transmit up to two 2-Tone, DTMF or Selcall codes that have been pre-programmed into
the radio's Analog Contacts list. The Contact Name will appear on the 2
Contact Name is "Cont 1".
•
Press and hold the P2 BUTTON when "Send Cont 1" appears on the display. Release the button after the
S e n d
double beep is heard on the speaker.
C o n t
1
• The radio transmits the 2-Tone, DTMF or Selcall code on the analog channel currently selected.
• The 2-Tone, DTMF or Selcall code will be heard on the radio speaker as it is being sent.
• Sending the 2-Tone, DTMF or Selcall code is a one-time occurrence, to resend the code it must again be
selected with the P2 BUTTON.
• This feature is only available on Analog channels.
Send Contact
The base radio can transmit a DMR Contact code to selectively signal other radios or radio operated devices.
(DMR)
The P2 BUTTON can transmit up to two DMR Group or Individual ID codes that have been pre-programmed
into the radio's DMR Contacts list. The Contact Name will appear on the 2
the Contact Name is "Cont 2".
•
Press and hold the P2 BUTTON when "Send Cont 2" appears on the display. Release the button after the
S e n d
double beep is heard on the speaker.
C o n t
2
•
The radio transmits the Group or Individual ID on the DMR channel currently selected.
• Sending the DMR Contact code is a one-time occurrence, to resend it must again be selected with the P2
BUTTON.
• This feature is only available on DMR channels.
Have questions? Call 800-872-1872 or visit our website at www.ritron.com
B
R
U
M
ASE
ADIO
SER
ANUAL
R
O
ADIO
PERATION
nd
line of the display. In this example the
nd
line of the display. In this example
- G
ENERAL
7
Advertisement
Table of Contents
