P2 Button - Ritron RBS-477DMR User Manual

RBS-477DMR DMR/A
NALOG
P2 B
UTTON
The P2 BUTTON can be programmed for a number of functions. Press and release the P2 BUTTON to step through the
programmed functions. Stop on the desired function and hold the button for 2 seconds until a double beep is heard on the speaker.
Scan The base radio can scan all channels that have been flagged for Scan.
•
Press and hold the P2 BUTTON when "Scan" appears on the display. Release the button after the double
S c a n
beep is heard on the speaker.
•
The base radio sounds the Scan Beep, and then repeatedly checks each channel in the scan list. The
S c a n n i n g
channel display will show "Scanning" as they are scanned.
•
When a call is received while scanning, the base radio will stop scanning to let you hear communications on
C H A N 1
that channel. The display will indicate the Channel Name and "Busy" will appear on the 2
B u s y D
After the incoming transmission has ended the base radio will pause before it resumes scanning to allow
you time to respond.
•
When transmitting from the Scan channel, the base radio will go to the last channel on which a signal was
C H A N 1
received, then transmit. After you release the PTT BUTTON the base radio will pause to allow time for a
T X D
response, and then resume scanning.
If the radio is programmed for "Jump to Priority on PTT", pressing the PTT BUTTON will transmit on the
assigned Priority Channel.
•
If a call is received while scanning and you would like to temporarily remove the channel from the scan list,
S c a n
Press and hold the P2 BUTTON when "Scan Block" appears on the display. Release the button after the
B l o c k
double beep is heard on the speaker and the channel will be removed from the scan list. The channel can
be added back to the scan list by selecting "Scan" with the P2 BUTTON.
•
To disable the Scan function press and hold the P2 BUTTON when "Scan Off" appears on the display.
S c a n
Release the button after the double beep is heard on the speaker.
O f f
Pressing the CHANNEL SELECTOR button to select a radio channel will also disable the Scan function.
Last Channel The base radio can be quickly set to the last channel that received a call while scanning.
•
Press and hold the P2 BUTTON when "Last Channel" appears on the display. Release the button after the
L a s t
double beep is heard on the speaker.
C h a n n e l
• The radio will stop scanning and go to the channel on which the most recent call was received.
Monitor The base radio can be temporarily set to receive all on-frequency signals on Analog channels.
•
Press and hold the P2 BUTTON when "Monitor" appears on the display. Release the button after the
M o n i t o r
double beep is heard on the speaker.
•
The display will indicate the Channel Name and "Mon" will appear on the 2
C H A N 1
channel's radio frequency will be heard on the radio speaker.
M o n A
If you are unable to activate the Monitor function, the channel has been programmed for "Monitor Lockout".
•
To disable the Monitor function, press and hold the P2 BUTTON when "Monitor Off" appears on the display.
M o n i t o r
Release the button after the double beep is heard on the speaker.
O f f
Changing the radio channel will automatically disable the Monitor function.
• This feature is only available on Analog channels.
Send Call Tone The base radio can transmit a Call Tone to alert radio users of an incoming call.
•
Press and hold the P2 BUTTON when "Send Calltone" appears on the display. Release the button after the
S e n d
double beep is heard on the speaker.
C a l l t o n e
•
The radio transmits a Call Tone on the channel currently selected.
•
The Call Tone will be heard on the radio speaker as it is being sent.
•
Sending the Call Tone is a one-time occurrence, to resend the Call Tone it must again be selected with the

P2 BUTTON.

•
This feature is helpful when the receiving radios are in a high noise environment and may not hear a voice
transmission.
Have questions? Call 800-872-1872 or visit our website at www.ritron.com
B R U M
ASE ADIO SER ANUAL
R O - G
ADIO PERATION ENERAL
nd
line.
nd
line. All activity on the
6