Transmit - Dmr Channels; P1 Button - Dmr Channels - Ritron RBS-477DMR User Manual

RBS-477DMR DMR/A
NALOG
T – DMR C
RANSMIT HANNELS
Normally, you should monitor the channel before transmitting and talk only when the channel is clear. If "Busy"
C H A N 1
appears on the 2
B u s y D
To transmit
•
Hold down the Push-To-Talk button and, with the radio at least 6 inches away, talk into the microphone.
C H A N 1
Speak in a normal tone, since talking louder will not improve the listener's reception.
T X D
•
The radio will transmit the Primary TX Contact code programmed into the channel. This will normally be a
Group call type contained in the DMR Contacts list.
•
When transmitting the DMR Channel Name will appear on the 1
the 2
•
Keep talk times as short and infrequent as possible to allow others to use the channel.
P1 B – DMR C
UTTON HANNELS
The P1 button is used to select DMR Contacts that can be used to communicate with other radio talk groups, or with an individual
user. The RBS-477DMR radio can be programmed with 48 Individual or Group Contacts. Any number of the 48 Analog contacts can
be assigned to the P1 button on a per-channel basis.
•
Press and release the P1 BUTTON until the desired DMR Contact appears on the 2
C H A N 1
•
With the DMR Contact name showing on the 2
C o n t 1 D
transmits with the selected DMR Contact code.
•
This feature is only available on DMR channels.
Have questions? Call 800-872-1872 or visit our website at www.ritron.com
B R U M
ASE ADIO SER
nd
line of the display the radio channel is in use and you should not transmit.
nd
line.
ANUAL
nd
line of the display, press the PTT button and the radio
R O – DMR C
ADIO PERATION
st
line of the display and TX will appear on
nd
line of the display.
HANNELS
12