Siemens SCALANCE S615 Operating Instructions Manual page 6

Simatic net industrial ethernet security
Hide thumbs Also See for SCALANCE S615:
Table of Contents

Advertisement

Preface
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing confidential
data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
(https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site
are not possible.
Trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SCALANCE, SINEMA, KEY-PLUG, C-PLUG
License conditions
Note
Open source software
Read the license conditions for open source software carefully before using the product.
You will find license conditions in the following documents on the supplied data medium:
• OSS_Scalance-M-800-S615_86.pdf
6
Operating Instructions, 10/2022, C79000-G8976-C389-07
are
®
SCALANCE S615

Advertisement

Table of Contents
loading

Table of Contents