Advanced Menu Set
Advanced Menu Set
You will need to enter the master password (111111) to enter the Advanced Menu settings
1. CHANGE PASSWORD - Allows you to change the
password for the DVR. Navigate to this option
using the
buttons, and press the
access the PASSWORD menu:
[ PASSWORD ]
• Current Password - Default Master Password is
111111
• New Password: Enter a new password
• Confirm Password: Confirm the new password
2. PASSWORD ENABLE - Sets the Password to ON/
OFF for Recording. Navigate to this option using
the
buttons, and press the button to change
the option.
3. DEFAULT SETTING - Resets the DVR to factory
defaults. Navigate to this option using the
buttons, and press the button to reset the system
to factory defaults. You will be prompted to load
defaults:
[ DEFAULT LOAD - Y/N ]
• YES - Press Play
• NO - Press any key
NOTE: If you reset the DVR to Factory Defaults,
ALL SETTINGS will be reset except for the DATE
and TIME.
4. OVERWRITE ENABLE - Allows for data overwrite
on the Hard Drive. Navigate to this option using
the
buttons, and press the button to change
the option to Y/N.
5. MASTER HDD CLEAR - Clears all data on the
Master Hard Drive. Navigate to this option using
the
buttons, and press the
all data.
6. SLAVE HDD CLEAR - Clears all data on the Slave
Hard Drive. Navigate to this option using the
buttons, and press the
no Slave drive is present, the N/A message will
appear.
7. VIDEO MODE - Sets the video mode to NTSC
or PAL.Navigate to this option using the
buttons, and press the
24
button to
button to clear
button to clear all data. If
button to change.
ADVANCED MENU
.. CHANGE PASSWORD
PASSWORD ENABLE
.. DEFAULT SETTING
OVERWRITE ENABLE
MASTER HDD CLEAR
SLAVE HDD CLEAR
VIDEO MODE
[
]MOVE [ ]SELECT [
[ OFF]
[ YES ]
[ N/A ]
[ NTSC]
]EXIT