Subaru Outback 2015 Manual page 322

5-98
Audio/What to do if...
When registering/connecting a cellular phone
Symptom
A cellular phone cannot be regis-
tered.
A Bluetooth connection cannot be
made.
"Unable to dial. Please check your
phone. (Unable to dial. Please
check your phone.)"
*: For details, refer to the owner's manual that came with the cellular phone.
Likely cause
An incorrect passcode was entered
on the cellular phone.
The registration operation has not
been completed on the cellular phone
side.
Old registration information remains
on either this system or the cellular
phone.
Another Bluetooth device is already
connected.
Bluetooth function is not enabled on
the cellular phone.
Automatic Bluetooth connection on
this system is set to off.
Bluetooth function is not enabled on
the cellular phone.
Old registration information remains
on either this system or the cellular
phone.
Solution
Enter the correct passcode on the cellular phone.
Complete the registration operation on the cellular
phone (approve registration on the phone).
Delete the existing registration information from
both this system and the cellular phone, then
register the cellular phone you wish to connect to
this system.
Manually connect the cellular phone you wish to
use to this system.
Enable the Bluetooth function on the cellular phone.
Set automatic Bluetooth connection on this system
to on when the ignition switch is turned to the "ACC"
or "ON" position.
Enable the Bluetooth function on the cellular phone.
Delete the existing registration information from
both this system and the cellular phone, then
register the cellular phone you wish to connect to
this system.
Page
Cellular This
phone system
—
*
—
*
* 5-77
—
5-77
—
*
—
5-77
—
*
5-77
*